Mounting and Location

Mounting and Location


Whenever possible, pumps should not be installed outdoors or in excessively hot, humid, dirty or dusty environments.  If this is unavoidable, the pump should be protected with a suitable cover or ventilated enclosure.  In cold applications, pumps need to be protected from freezing which can cause serious pump damage.


The pump, drive, and motor should be mounted horizontally on a strong, rigid base plate or frame that will resist twisting and distortion during operation.  The base can be bolted to the floor or to a machine.  Ideally the base should be large enough that no pump components and accessories overhang the base dimensions.

Reciprocating pumps will create vibration during operation.  To isolate this vibration from other equipment, the pump base unit can be mounted on anti-vibration mounts.  Vibration can also be abated by isolating the inlet and outlet of the pump using hoses.  Avoid hard plumbing the pump to a piping system.

Search For:
Model #:
Type of
Flow Rate:
  gpm lpm
  psi bar
Drive Type:


1681 94th Lane NE
Minneapolis, MN 55449

Call Now

p. (763) 780-5440
f. (763) 780-2958

Contact Us