8 Frame Block-Style Plunger Pump
Industrial Duty, Long Lasting, Dependable Pumps
This triplex (three plunger rods) positive displacement, reciprocating plunger pump is constructed with 316 stainless steel block-style manifolds, 316 stainless steel valve assemblies, solid ceramic plungers and standard NBR (Buna-N) seals and O-rings.
The "K" indicates the pump is built with a unique flushed inlet manifold that permits an external liquid to provide added cooling for high-temperature fluids and lubrication for low-lubricity liquids like DI (deionized) water. When used with the 990663 Flushing Assembly, the package offers a self-contained fluid source for pumping through the flushed manifold.
The "M" designation uses high-strength connecting rods in the drive end along with other modifications to allow for use with higher inlet conditions.
The 1750 RPM permits multiple drive options, including direct drive with a bell housing and flexible coupling, clutch or belt drive.
| Max Flow | 2.9 gpm / 11 lpm |
| Max Pressure | 5000 |
| Inlet Port Size | 1/2" NPT(F) |
| Discharge Port Size | 3/8" NPT(F) |
| RPM | 1750 |
| Drive Type(s) | Belt, Clutch, Flexible Coupling and Bellhousing |
| Material | 316 Stainless Steel |
Product Information
-
- Tech Bulletin 036 - Identifying Your Pump
- Tech Bulletin 074 - Torque Chart
- Tech Bulletin 083 - Winterizing a Pump
- Tech Bulletin 095 - Galling Prevention
- Tech Bulletin 118 - Crankcase Paint Change
- Tech Bulletin 121 - 7 and 8 Frame Plunger Pump Bell Housing Mounting
- Tech Bulletin 134 - Piston and Plunger Pump Crankcase Capacities
