3CP Plunger Pump With Gearbox
Industrial Duty, Long Lasting, Dependable Pumps
Model: 3CP1120G
This triplex (three plunger rods) positive displacement, reciprocating plunger pump is constructed with a brass manifold, 304 stainless steel valve assemblies, solid ceramic plungers and standard NBR (Buna-N) seals and O-rings.
This pump comes complete with a gearbox attached for direct mounting to a gas engine with a 3/4" straight horizontal shaft. The pump and gearbox share an oil reservoir for ease of service and filling. No additional gear lube is required.
Technical Specifications
| Max Flow | 3.5 gpm / 13.2 lpm |
| Max Pressure | 2200 |
| Inlet Port Size | 1/2" NPT(F) |
| Discharge Port Size | 3/8" NPT(F) |
| RPM | 3600 |
| Drive Type(s) | Direct, Gearbox |
| Material | Brass |
Product Information
-
- Tech Bulletin 002 - Inlet Pressure vs. Water Temperature
- Tech Bulletin 034 - Servicing Crankcase Section - Ball Bearing Models
- Tech Bulletin 036 - Identifying Your Pump
- Tech Bulletin 043 - Servicing the Low and High Pressure Seals
- Tech Bulletin 061 - Throttle Controller Installation & Adjustment
- Tech Bulletin 074 - Torque Chart
- Tech Bulletin 083 - Winterizing a Pump
- Tech Bulletin 134 - Piston and Plunger Pump Crankcase Capacities
- Tech Bulletin 129 - Replacement Pressure Washer Pumps
