25 Frame Plunger Pump
Industrial Duty, Long Lasting, Dependable Pumps
Model: 2530E
This triplex (three plunger rods) positive displacement, reciprocating plunger pump is constructed with chrome-plated brass manifolds, 304 stainless steel valve assemblies, solid ceramic plungers and standard NBR (Buna-N) seals and O-rings.
This pump also features a durable blue two mil epoxy paint treatment on the crankcase, rear cover and bearing covers and a unique liquid gasket between the crankcase and manifold to seal moisture out.
Technical Specifications
| Max Flow | 25 gpm / 94.6 lpm |
| Max Pressure | 1200 |
| Inlet Port Size | 1 1/4" NPT(F) |
| Discharge Port Size | 3/4" NPT(F) |
| RPM | 1025 |
| Drive Type(s) | Belt, Clutch |
| Material | Brass |
Product Information
-
- Tech Bulletin 126 - 25 and 28 Frame Rear Cover Change
- Tech Bulletin 002 - Inlet Pressure vs. Water Temperature
- Tech Bulletin 024 - Lubrication of Lo-Pressure Seals
- Tech Bulletin 034 - Servicing Crankcase Section - Ball Bearing Models
- Tech Bulletin 036 - Identifying Your Pump
- Tech Bulletin 043 - Servicing the Low and High Pressure Seals
- Tech Bulletin 074 - Torque Chart
- Tech Bulletin 083 - Winterizing a Pump
- Tech Bulletin 085 - M7 to M8 Keyway
- Tech Bulletin 118 - Crankcase Paint Change
- Tech Bulletin 134 - Piston and Plunger Pump Crankcase Capacities
- Tech Bulletin 135 - 25 Frame Crankcase With 8 Threaded Bearing Cover Holes
