18 Frame Block-Style Plunger Pump
Industrial Duty, Long Lasting, Dependable Pumps
Model: 1810K
This triplex (three plunger rods) positive displacement, reciprocating plunger pump is constructed of SFSS heat-treated stainless steel block-style manifolds, SFSS discharge valve assemblies with a ceramic ball, solid ceramic plungers, UHMV V-packings and NBR (Buna-N) O-rings.
The "K" indicates the pump is built with a unique flushed inlet manifold that permits an external liquid to provide added cooling for high-temperature fluids and lubrication for low-lubricity liquids. When used with the 990663 Flushing Assembly, the package offers a self-contained fluid source for pumping through the flushed manifold.
Technical Specifications
| Max Flow | 3 gpm / 11.4 lpm |
| Max Pressure | 10000 |
| Inlet Port Size | 1/2" NPT(F) |
| Discharge Port Size | 3/8" NPT(F) |
| RPM | 1500 |
| Drive Type(s) | Belt, Clutch |
| Material | 304 Stainless Steel |
Product Information
-
- Tech Bulletin 002 - Inlet Pressure vs. Water Temperature
- Tech Bulletin 024 - Lubrication of Lo-Pressure Seals
- Tech Bulletin 035 - Servicing Crankcase Section - Roller Bearing Models
- Tech Bulletin 036 - Identifying Your Pump
- Tech Bulletin 043 - Servicing the Low and High Pressure Seals
- Tech Bulletin 053 - Liquid Gasket for Seal and Valve Servicing
- Tech Bulletin 074 - Torque Chart
- Tech Bulletin 083 - Winterizing a Pump
- Tech Bulletin 095 - Galling Prevention
- Tech Bulletin 118 - Crankcase Paint Change
- Tech Bulletin 128 - 15 and 18 Frame Crankcase With 8 Threaded Bearing Cover Holes
- Tech Bulletin 134 - Piston and Plunger Pump Crankcase Capacities
