15 Frame Plunger Pump - TEG
Industrial Duty, Long Lasting, Dependable Pumps
This triplex (three plunger rods) positive displacement, reciprocating plunger pump is constructed with a 316 stainless steel manifold, 316 stainless steel valve assemblies, solid ceramic plungers, and FPM seals and O-rings with specially blended PTFE high and low-pressure seals.
We have designed our TEG pumps to handle Triethylene Glycol (TEG) up to 240°F (116°C). Our electric/engine-driven TEG pump product line has been field-proven in the most rigorous dehydration conditions and will meet Hazardous Air Pollutants (HAP) compliance and lower regulatory cost.
The "C" indicates the pump is built with a unique flushed inlet manifold that permits an external liquid to provide added cooling for high-temperature fluids. When used with the 990663 Flushing Assembly, the package offers a self-contained fluid source for pumping through the flushed manifold.
| Max Flow | 10 gpm / 37.9 lpm |
| Max Pressure | 2200 |
| Inlet Port Size | 3/4" NPT(F) |
| Discharge Port Size | 1/2" NPT(F) |
| RPM | 958 |
| Drive Type(s) | Belt, Clutch |
| Material | 316 Stainless Steel |
Product Information
-
- Tech Bulletin 024 - Lubrication of Lo-Pressure Seals
- Tech Bulletin 035 - Servicing Crankcase Section - Roller Bearing Models
- Tech Bulletin 036 - Identifying Your Pump
- Tech Bulletin 074 - Torque Chart
- Tech Bulletin 083 - Winterizing a Pump
- Tech Bulletin 095 - Galling Prevention
- Tech Bulletin 118 - Crankcase Paint Change
- Tech Bulletin 128 - 15 and 18 Frame Crankcase With 8 Threaded Bearing Cover Holes
- Tech Bulletin 134 - Piston and Plunger Pump Crankcase Capacities
