35 Frame Plunger Pump
Industrial Duty, Long Lasting, Dependable Pumps
Model: 3560RST14
This triplex (three plunger rods) positive displacement, reciprocating plunger pump is constructed with a forged brass inlet manifold and a 316 stainless steel block-style discharge manifold, 304 stainless steel valve assemblies, solid ceramic plungers and standard NBR (Buna-N) seals and O-rings.
The 14-tooth hollow spline shaft pairs with either 2 or 4-bolt SAE C hydraulic motors, significantly reducing the overall width of the assembled pump and motor compared to standard shaft configurations.
Technical Specifications
| Max Flow | 20 gpm / 76 lpm |
| Max Pressure | 4000 |
| Inlet Port Size | 1 1/2" NPT(F) |
| Discharge Port Size | 1" NPT(F) |
| RPM | 1160 |
| Drive Type(s) | Direct |
| Material | Brass |
Product Information
-
- Tech Bulletin 002 - Inlet Pressure vs. Water Temperature
- Tech Bulletin 024 - Lubrication of Lo-Pressure Seals
- Tech Bulletin 035 - Servicing Crankcase Section - Roller Bearing Models
- Tech Bulletin 036 - Identifying Your Pump
- Tech Bulletin 043 - Servicing the Low and High Pressure Seals
- Tech Bulletin 074 - Torque Chart
- Tech Bulletin 083 - Winterizing a Pump
- Tech Bulletin 095 - Galling Prevention
- Tech Bulletin 134 - Piston and Plunger Pump Crankcase Capacities
