7 Frame Plunger Pump
Industrial Duty, Long Lasting, Dependable Pumps
Model: 550
This triplex (three plunger rods) positive displacement, reciprocating plunger pump is constructed with a chrome-plated brass manifold, 304 stainless steel valve assemblies, solid ceramic plungers and standard NBR (Buna-N) seals and O-rings.
Technical Specifications
| Max Flow | 5 gpm / 18.9 lpm |
| Max Pressure | 3000 |
| Inlet Port Size | 1/2" NPT(F) |
| Discharge Port Size | 3/8" NPT(F) |
| RPM | 1415 |
| Drive Type(s) | Belt, Clutch, Flexible Coupling and Bellhousing |
| Material | Brass |
Product Information
-
- Tech Bulletin 123 - Crankcase Threaded Side Holes
- Tech Bulletin 002 - Inlet Pressure vs. Water Temperature
- Tech Bulletin 024 - Lubrication of Lo-Pressure Seals
- Tech Bulletin 027 - PVDF Spring Retainers
- Tech Bulletin 032 - Shaft Extension and Manifold Port Dimensions
- Tech Bulletin 035 - Servicing Crankcase Section - Roller Bearing Models
- Tech Bulletin 036 - Identifying Your Pump
- Tech Bulletin 043 - Servicing the Low and High Pressure Seals
- Tech Bulletin 045 - 1-Piece Plunger Retainer w/Stud-SS
- Tech Bulletin 048 - Extended Valve Plug
- Tech Bulletin 051 - M8 to M10 Manifold and Crankcase
- Tech Bulletin 054 - 2-Piece Seal Retainer
- Tech Bulletin 067 - Brass to Stainless Plunger Retainer
- Tech Bulletin 074 - Torque Chart
- Tech Bulletin 083 - Winterizing a Pump
- Tech Bulletin 105 - Seal Retainer Assemblies
- Tech Bulletin 106 - Crankcase and Cover Change
- Tech Bulletin 118 - Crankcase Paint Change
- Tech Bulletin 134 - Piston and Plunger Pump Crankcase Capacities
