25 Frame Plunger Pump
Industrial Duty, Long Lasting, Dependable Pumps
Model: 2560
This triplex (three plunger rods) positive displacement, reciprocating plunger pump is constructed with a forged brass inlet manifold and a brass block-style discharge manifold, 304 stainless steel valve assemblies, solid ceramic plungers and standard NBR (Buna-N) seals and O-rings.
Our model 2560BH (bell housing version) comes with a machined bearing cover to mate with our 76SAEC.25FR hydraulic bell housing, allowing the pump to be driven by an SAE C hydraulic motor.
Technical Specifications
| Max Flow | 16 gpm / 60.5 lpm |
| Max Pressure | 3000 |
| Inlet Port Size | 1 1/4" NPT(F) |
| Discharge Port Size | 3/4" NPT(F) |
| RPM | 1510 |
| Drive Type(s) | Belt, Flexible Coupling and Bellhousing |
| Material | Brass |
Product Information
-
- Tech Bulletin 002 - Inlet Pressure vs. Water Temperature
- Tech Bulletin 024 - Lubrication of Lo-Pressure Seals
- Tech Bulletin 034 - Servicing Crankcase Section - Ball Bearing Models
- Tech Bulletin 036 - Identifying Your Pump
- Tech Bulletin 043 - Servicing the Low and High Pressure Seals
- Tech Bulletin 074 - Torque Chart
- Tech Bulletin 083 - Winterizing a Pump
- Tech Bulletin 134 - Piston and Plunger Pump Crankcase Capacities
