Chemical Pumps
Industrial Duty High Pressure Pumps for Chemical Applications
Cat Pumps offers a wide selection of elastomers and manifold materials to meet a large variety of chemical application needs. Cat Pumps products work best with fluids with a pH level between 5 and 9 and a viscosity less than 500 cP (centipoises). Please contact our technical support team for selection assistance If you are working outside of these ranges.
Optional Seal and O-Ring Configurations
Material
- FPM - Fluorocarbon (Viton®) seals and O-rings - .0110
- Fluorocarbon (Viton®) seals only - .0100
- PTFE - Pure Polytetrafluoroethylene (Teflon®) seals and Buna O-rings - .0700
- Pure Polytetrafluoroethylene (Teflon®) seals and FPM O-rings - .0710
- IPFE - Pure Polytetrafluoroethylene (Teflon®) seals and Isolast O-rings - .0770
- EPDM - Ethylene Propylene Diene Monamer seals and O-rings - .0220
- NBRS - Buna-N silicone free seals and O-rings - .6000
- STHT - Special Teflon® high temperature low and high pressure seals - .3400
- HT - High temperature seal for plunger pump high pressure seals - .3000
- High temperature V-HOT cup for piston pumps - .3000
- BNG - Blue-dot (non-greased) Buna-N seals with wicks for piston pumps - .0300
- ST4 - Special Teflon® high temperature low and high pressure seals with FPM O-rings for 240°F operation - .44101